IMPLEMENTATION OF OCCUPATIONAL SAFETY TRAINING FOR DOCTORS AT OHS TRAINING CENTER MEDAN
Article Sidebar
Published
Apr 17, 2023
Main Article Content
Abstract
This study aims to find out the implementation of Occupational Health and Safety (OHS) training for company doctors at OHS Training Center Medan.; the obstacles in the implementation of OHS training of corporate doctors in OHS Training Center Medan.; the efforts implemented on the company's OHS doctor training. This research is a qualitative descriptive research and data collection techniques including, interviews, observations, and documentation. The subjects in the study were 10 people and the data validity technique used was source triangulation. The results showed that the implementation of OHS for company doctors at The OHS Training Center Medan has been carried out; the obstacles to the implementation of OHS from the human factor such as there are still participants who do not comply with the rules. Obstacles from environmental factors are; the amount of Personal Protective Equipment has not met the needs of trainees, there has been no OHS warning in the practice room, lack of instructor supervision during practice in the field; the efforts to overcome obstacles in the implementation of OHS, such as providing socialization, the availability of personal protective equipment and work safety equipment for participants, reprimanding participants who violate the rules and imposing strict sanctions for violators of the code of conduct who commit repeated violations.
Article Details
How to Cite
[1]
S. Sumaryanto, S. Arif, O. Sinaga, Z. Zainuddin, and K. Kisno, “IMPLEMENTATION OF OCCUPATIONAL SAFETY TRAINING FOR DOCTORS AT OHS TRAINING CENTER MEDAN”, JURNAL EDUCATION AND DEVELOPMENT, vol. 11, no. 2, pp. 101-105, Apr. 2023.
Section
Artikel
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
References
Alim, A., Adam, A., & Jafar, Y. (2021). A Qualitative Study of the Implementation of Occupational Health and Safety Management Systems at Ibnu Sina Hospital, Makassar City, Indonesia. Indian Journal of Public Health Research & Development, 12(2), 27-31.
Botti, L., Melloni, R., & Oliva, M. (2022). Learn from the past and act for the future: A holistic and participative approach for improving occupational health and safety in industry. Safety Science, 145, 105475.
Brito, M. F., Ramos, A. L., Carneiro, P., & Gonçalves, M. A. (2019). A continuous improvement assessment tool, considering lean, safety and ergonomics. International Journal of Lean Six Sigma.
Chatigny, C. (2022). Occupational health and safety in initial vocational training: Reflection on the issues of prescription and integration in teaching and learning activities. Safety science, 147, 105580.
Chirico, F., Heponiemi, T., Pavlova, M., Zaffina, S., & Magnavita, N. (2019). Psychosocial risk prevention in a global occupational health perspective. A descriptive analysis. International journal of environmental research and public health, 16(14), 2470.
Cook, T. M. (2020). Personal protective equipment during the coronavirus disease (COVID) 2019 pandemic–a narrative review. Anaesthesia, 75(7), 920-927.
da Silva, S. L., & Amaral, F. G. (2019). Critical factors of success and barriers to the implementation of occupational health and safety management systems: A systematic review of literature. Safety science, 117, 123-132.
Dabbagh, R., & Yousefi, S. (2019). A hybrid decision-making approach based on FCM and MOORA for occupational health and safety risk analysis. Journal of safety research, 71, 111-123.
Dominelli, L. (2021). A green social work perspective on social work during the time of COVID‐19. International journal of social welfare, 30(1), 7-16.
Duryan, M., Smyth, H., Roberts, A., Rowlinson, S., & Sherratt, F. (2020). Knowledge transfer for occupational health and safety: Cultivating health and safety learning culture in construction firms. Accident Analysis & Prevention, 139, 105496.
Feldman, O., Meir, M., Shavit, D., Idelman, R., & Shavit, I. (2020). Exposure to a surrogate measure of contamination from simulated patients by emergency department personnel wearing personal protective equipment. Jama, 323(20), 2091-2093.
Gao, Y., Gonzalez, V. A., & Yiu, T. W. (2019). he effectiveness of traditional tools and computer-aided technologies for health and safety training in the construction sector: A systematic review. Computers & Education, 138, 101-115.
Khan, M. W., Ali, Y., De Felice, F., & Petrillo, A. (2019). Occupational health and safety in construction industry in Pakistan using modified-SIRA method. Safety science, 118, 109-118.
Kisno, K., Sherly, S., Dharma, E., Siregar, V. M., & Sugara, H. (2022). Pelatihan Softskill bagi Petugas Penanggulangan Kebakaran Kelas D PTPN IV Sumatera Utara. Jurnal Pengabdian kepada Masyarakat Nusantara, 3(2), 548-554.
Kisno, K., Siregar, V. M., Sugara, H., Purba, A. T., & Purba, S. (2022). Edukasi Keselamatan dan Kesehatan Kerja (K3) di Sekolah Menengah Kejuruan di Tanjung Morawa. Jurnal Abdi Insani, 9(2), 570-579.
Konijn, A. M., Lay, A. M., Boot, C. R., & Smith, P. M. (2018). The effect of active and passive occupational health and safety (OHS) training on OHS awareness and empowerment to participate in injury prevention among workers in Ontario and British Columbia (Canada). Safety science, 108, 286-291.
Leso, V., Fontana, L., & Lavicoli, I. (2018). The occupational health and safety dimension of Industry 4.0. La Medicina del lavoro, 109(5), 327.
Liu, X., & Li, X. (2022). Exploring the Formation Mechanism of Unsafe Construction Behavior and Testing Efficient Occupational Health and Safety (OHS) Programs. International Journal of Environmental Research and Public Health, 19(4), 2090.
Loosemore, M., & Malouf, N. (2019). Safety training and positive safety attitude formation in the Australian construction industry. Safety science, 113, 233-243.
Reese, C. D. (2018). Occupational health and safety management: a practical approach. CRC Press.
Reiman, A., Kaivo-oja, J., Parviainen, E., Takala, E. P., & Lauraeus, T. (2021). Human factors and ergonomics in manufacturing in the industry 4.0 context–A scoping review. Technology in Society, 65, 101572.
Rodrigues, M. A., Sá, A. M., Oliveira, A., Boustras, G., Leka, S., & Guldenmund, F. (2020). Occupational Health & Safety (OHS) management practices in micro-and small-sized enterprises: The case of the Portuguese waste management sector. Safety science, 129, 104794.
Sadeghi, S., Soltanmohammadlou, N., & Nasirzadeh, F. (2022). Applications of wireless sensor networks to improve occupational safety and health in underground mines. Journal of Safety Research.
Saputra, F., & Mahaputra, M. R. (2022). BuildingOccupational Safety and Health (K3): Analysis of the Work Environment and Work Discipline. Journal of Law, Politic and Humanities, 2(3), 105-114.
Singh, N., Tang, Y., & Ogunseitan, O. A. (2020). Environmentally sustainable management of used personal protective equipment. Environmental science & technology, 54(14), 8500-8502.
Sirois, F. M., & Owens, J. (2021). Factors associated with psychological distress in health-care workers during an infectious disease outbreak: a rapid systematic review of the evidence. Frontiers in psychiatry, 11, 58954.
Sumaryanto, S., Daryanto, E., & Kisno, K. (2022). Evaluasi Model CIPP Terhadap Manajemen Pelatihan Pengawasan Pelaksanaan Norma K3 Anggota Safety Committee Pabrik CPO Di Sumatera Utara. Jurnal Education and Development, 10(3), 175-182.
Vigoroso, L., Caffaro, F., & Cavallo, E. (2020). Occupational safety and visual communication: User-centred design of safety training material for migrant farmworkers in Italy. Safety science, 121, 562-572.
Yanar, B., Kosny, A., & Smith, P. M. (2018). Occupational health and safety vulnerability of recent immigrants and refugees. International journal of environmental research and public health, 15(9), 2004.
Yanar, B., Lay, M., & Smith, P. M. (2019). The interplay between supervisor safety support and occupational health and safety vulnerability on work injury. Safety and health at work, 10(2), 172-179.
Zhang, M., Shi, R., & Yang, Z. (2020). A critical review of vision-based occupational health and safety monitoring of construction site workers. Safety science, 126, 104658.
Botti, L., Melloni, R., & Oliva, M. (2022). Learn from the past and act for the future: A holistic and participative approach for improving occupational health and safety in industry. Safety Science, 145, 105475.
Brito, M. F., Ramos, A. L., Carneiro, P., & Gonçalves, M. A. (2019). A continuous improvement assessment tool, considering lean, safety and ergonomics. International Journal of Lean Six Sigma.
Chatigny, C. (2022). Occupational health and safety in initial vocational training: Reflection on the issues of prescription and integration in teaching and learning activities. Safety science, 147, 105580.
Chirico, F., Heponiemi, T., Pavlova, M., Zaffina, S., & Magnavita, N. (2019). Psychosocial risk prevention in a global occupational health perspective. A descriptive analysis. International journal of environmental research and public health, 16(14), 2470.
Cook, T. M. (2020). Personal protective equipment during the coronavirus disease (COVID) 2019 pandemic–a narrative review. Anaesthesia, 75(7), 920-927.
da Silva, S. L., & Amaral, F. G. (2019). Critical factors of success and barriers to the implementation of occupational health and safety management systems: A systematic review of literature. Safety science, 117, 123-132.
Dabbagh, R., & Yousefi, S. (2019). A hybrid decision-making approach based on FCM and MOORA for occupational health and safety risk analysis. Journal of safety research, 71, 111-123.
Dominelli, L. (2021). A green social work perspective on social work during the time of COVID‐19. International journal of social welfare, 30(1), 7-16.
Duryan, M., Smyth, H., Roberts, A., Rowlinson, S., & Sherratt, F. (2020). Knowledge transfer for occupational health and safety: Cultivating health and safety learning culture in construction firms. Accident Analysis & Prevention, 139, 105496.
Feldman, O., Meir, M., Shavit, D., Idelman, R., & Shavit, I. (2020). Exposure to a surrogate measure of contamination from simulated patients by emergency department personnel wearing personal protective equipment. Jama, 323(20), 2091-2093.
Gao, Y., Gonzalez, V. A., & Yiu, T. W. (2019). he effectiveness of traditional tools and computer-aided technologies for health and safety training in the construction sector: A systematic review. Computers & Education, 138, 101-115.
Khan, M. W., Ali, Y., De Felice, F., & Petrillo, A. (2019). Occupational health and safety in construction industry in Pakistan using modified-SIRA method. Safety science, 118, 109-118.
Kisno, K., Sherly, S., Dharma, E., Siregar, V. M., & Sugara, H. (2022). Pelatihan Softskill bagi Petugas Penanggulangan Kebakaran Kelas D PTPN IV Sumatera Utara. Jurnal Pengabdian kepada Masyarakat Nusantara, 3(2), 548-554.
Kisno, K., Siregar, V. M., Sugara, H., Purba, A. T., & Purba, S. (2022). Edukasi Keselamatan dan Kesehatan Kerja (K3) di Sekolah Menengah Kejuruan di Tanjung Morawa. Jurnal Abdi Insani, 9(2), 570-579.
Konijn, A. M., Lay, A. M., Boot, C. R., & Smith, P. M. (2018). The effect of active and passive occupational health and safety (OHS) training on OHS awareness and empowerment to participate in injury prevention among workers in Ontario and British Columbia (Canada). Safety science, 108, 286-291.
Leso, V., Fontana, L., & Lavicoli, I. (2018). The occupational health and safety dimension of Industry 4.0. La Medicina del lavoro, 109(5), 327.
Liu, X., & Li, X. (2022). Exploring the Formation Mechanism of Unsafe Construction Behavior and Testing Efficient Occupational Health and Safety (OHS) Programs. International Journal of Environmental Research and Public Health, 19(4), 2090.
Loosemore, M., & Malouf, N. (2019). Safety training and positive safety attitude formation in the Australian construction industry. Safety science, 113, 233-243.
Reese, C. D. (2018). Occupational health and safety management: a practical approach. CRC Press.
Reiman, A., Kaivo-oja, J., Parviainen, E., Takala, E. P., & Lauraeus, T. (2021). Human factors and ergonomics in manufacturing in the industry 4.0 context–A scoping review. Technology in Society, 65, 101572.
Rodrigues, M. A., Sá, A. M., Oliveira, A., Boustras, G., Leka, S., & Guldenmund, F. (2020). Occupational Health & Safety (OHS) management practices in micro-and small-sized enterprises: The case of the Portuguese waste management sector. Safety science, 129, 104794.
Sadeghi, S., Soltanmohammadlou, N., & Nasirzadeh, F. (2022). Applications of wireless sensor networks to improve occupational safety and health in underground mines. Journal of Safety Research.
Saputra, F., & Mahaputra, M. R. (2022). BuildingOccupational Safety and Health (K3): Analysis of the Work Environment and Work Discipline. Journal of Law, Politic and Humanities, 2(3), 105-114.
Singh, N., Tang, Y., & Ogunseitan, O. A. (2020). Environmentally sustainable management of used personal protective equipment. Environmental science & technology, 54(14), 8500-8502.
Sirois, F. M., & Owens, J. (2021). Factors associated with psychological distress in health-care workers during an infectious disease outbreak: a rapid systematic review of the evidence. Frontiers in psychiatry, 11, 58954.
Sumaryanto, S., Daryanto, E., & Kisno, K. (2022). Evaluasi Model CIPP Terhadap Manajemen Pelatihan Pengawasan Pelaksanaan Norma K3 Anggota Safety Committee Pabrik CPO Di Sumatera Utara. Jurnal Education and Development, 10(3), 175-182.
Vigoroso, L., Caffaro, F., & Cavallo, E. (2020). Occupational safety and visual communication: User-centred design of safety training material for migrant farmworkers in Italy. Safety science, 121, 562-572.
Yanar, B., Kosny, A., & Smith, P. M. (2018). Occupational health and safety vulnerability of recent immigrants and refugees. International journal of environmental research and public health, 15(9), 2004.
Yanar, B., Lay, M., & Smith, P. M. (2019). The interplay between supervisor safety support and occupational health and safety vulnerability on work injury. Safety and health at work, 10(2), 172-179.
Zhang, M., Shi, R., & Yang, Z. (2020). A critical review of vision-based occupational health and safety monitoring of construction site workers. Safety science, 126, 104658.